3rd International Symposium


September 12-14th, 2008, Belgrade, SERBIA



You can download pdf version of program here

FRIDAY, 12th

9:30 - 10:00

Opening ceremony

10:00 - 10:30

B. Jovanovic


10:30 - 11:00

R. Bähr, J. Pavlović, G. Krstić

The highlight of the research topics conducted at the University of Magdeburg-IFQ with special emphasis on the casting technologies of the light metals used in automotive industry

11:00 - 11:15

Coffee break

11:15 - 11:45

Yong Du, Wei-Wei Zhang, Wei Xiong, Rong-Xiang Hu, Jiong Wang, Lijun Zhang, Philip Nash, Xiao-Gang Lu, Hong-Hui Xu

A novel approach for acquiring thermodynamic database of Al alloys and investigation of microstructure during solidification of Al alloys

11:45 - 12:15

V. Radmilović

Core/shell nanostructures embedded in Al rich matrices

12:15 - 12:45

Karl-Heinz Spitzer, Joachim Kroos

Manganese Steels of high strength and ductility and processes for their production

12:45 - 13:15

Dimtrios Panias, Athina Krestou

Synthesis of nano-boehmite from aluminate solutions for catalytic applications

13:15 - 15:00

Lunch break

15:00 - 15:15

S.A. Risteska, J.K. Mickovski

Test Temperature and Strain Rate on Serrated Yielding of AlMgSi0.5

15:15 - 15:30

A. Kostov, Bernd Friedrich, D. Živković

Thermodynamic calculations and interaction between ceramics crucible and titanium-Aluminum Alloys

15:30 - 15:45

D. Manasijević, D. Minić, D. Živković, J. Vřešťál, N. Talijan, J. Stajić- Trošić, S. Marjanović, R. Todorović, A. Aljilji

Thermal analysis of the ternary system Cu-In-Sb

15:45 - 16:00

I. Dervišević, D. Minić, D. Petković, J. Đokić

Thermal Analysis and Comparative Thermodynamic Calculation of Ga-Sb-Zn Ternary System

16:00 - 16:15

V. Rajković, D. Božić, M. T. Jovanović

Characteristics of Cu-Al2O3 composite powders of various starting particle size obtained by high energy milling

16:15 - 16:30

B. Zlatičanin, M. Filipović

Mathematical Model for Microsegregation of Al-Cu 5wt.%-Mg 3wt.% Alloys

16:30 - 16:45

J. Đokić , D. Petković, D. Minić, Ž. Kamberović

Characterization of the Slag From Silicothermic Reduction Process

16:45 - 17:00

M. Cvijovic, M. Bokorov, M. Đuric, M. Skokovic

SEM-EDX Identification of Implements in the
Copper Tube Production and ICP-OES Analysis

17:00 - 17:15

M. B. Đurdevic, Z. Odanovic, M. Filipovic, K. Raic

Control of Secondary Dendrite Arm Spacing in Solidified Aluminium As Cast Products by Chemical Compositions and Process Parameters


Symposium dinner


11:00 - 11:15

V. Ćosović, N. Talijan, A. Grujić, J. Stajić- Trošić, T. Žák

Structure and Magnetic Properties of Nanocomposite Nd-Fe-B Alloy

11:15 - 11:30

S. Kastelec -Macura, I. Bobić, Z. Aćimović-Pavlović

Zinc Based Aluminium Composite Obtained by Compocasting

11:30 - 11:45

E. Romhanji, M. Filipović, Ž. Kamberović

Internal Oxidation Of Ag-Sn-In-Te And Ag-Sn-Cu-Bi Alloys

11:45 - 12:00

S. Nestorović, I. Rangelov, J. Stajić-Trošić, V. Ćosović

Improvements the Properties of Sintered Copper by Alloying and Thermomechanical Treatment

12:00 - 12:15

Coffee break

12:15 - 12:30

Z. Martinova, G. Zlateva, V. Nikolov

Microstructural Factors Affecting on Defects in Anodized 6060 Alloy Profiles for Architecture Use

12:30 - 12:45

V. Radojevic, J. Lamovec, V. Jovic, B. Popovic, R. Aleksic

Micromechanical Behaviour of Composite Structures consisted of Nickel Electrodeposited Films on Different Substrates

12:45 - 13:00

S. Ivanov, E. Požega, B. Marjanovic

The Influence of Activators on the Formation of Boride Layers of Pressed and Boroned Iron Powder Samples

13:00 - 13:15

S. Kostić, A. Golubović, A. Valčić

Primary and Secondary Dendrite Spacing of Ni-based Superalloy Single Crystals

13:15 - 13:30

J.P. Popić, B.V. Jegdić, J. Stevanović , J. Stajić-Trošić

Corrosion Potential of the 304 Stainless Steel in Weakly Acid Solutions