Conference PROGRAMME

09:00

REGISTRATION

10:00

OPENING Session Chairman: N. Radović

Representatives of General Sponsors of the Conference:

Ministry of Science of Republic of Serbia

U.S. Steel Serbia

Impol-Seval

Session I Chairman: M.Jovanović

11:00

Plenary speaker: H. W. Zandbergen

Use of Electron Microscopy in Materials Science

H. W. Zandbergen

12:00

COFFEE BREAK

12:30

Structure, Design and Applications of Geopolymeric Materials

Ioanna Giannopoulou, Dimitrios Panias

12:45

Theoretical Aspects of Structural Design of Various Metal Powders Obtained by Ultrasonic Spray Pyrolysis

V. Jokanović, S. Stopić, B. Friedrich, Z. Cvijović

13:00

Determination of Strain Distribution in Cold Extruded Workpiece – An Experimental Approach

P. Skakun, M. Milutinović,
M. Plančak, L. Šiđanin

13:15

Approximation of Material Behaviour of PLLA Polymer in HAP/PLLA Biocomposite Material Using Nanoindentation and Finite Element Method

I. Balać, D. Aleksendrić, C.Y. Tang,
C.P. Tsui, P.S. Uskoković, D.P. Uskoković

13:30

Modeling of Wetting Phenomena at Grain Boundary Grooves of Metal/Ceramic Joints

M. Mihailović, S. Dj. Mesarovic, K. T. Raic,
T. Volkov-Husović

13:45

The effect of residual stresses on bimaterial structure with initial crack located near interface

M. Rakin, O. Kolednik, N.K. Simha,
B. Medjo, F. D. Fischer

14:00

Session II Chairman: E. Romhanji

15:30

Micromechanics of a carbon nanotube turf and numerical modeling of nanoindentation

H. Radhakrishnan, S.Dj. Mesarovic,
C.M. McCarter, D.F. Bahr, C.D. Richards

15:45

TEM and Dual Beam (SEM/FIB) investigations of subsurface cracks and White Etching Area (WEA) formed in a deep groove ball bearing caused by Rolling Contact Fatigue (RCF)

A. Grabulov, H. W. Zandbergen

16:00

Structure and Properties of Advanced Ag-SnO2 Electrical Contact Materials

N. Talijan, V. Ćosović, J. Stajić-Trošić,
A. Grujić, D. Živković, E. Romhanji

16:15

An Analysis of Processing and Properties of the Ultra-high Strength Steel Sheets

Z. Odanović, B. Katavić, Mile Djurdjević,
V. Grabulov

16:30

Corrosion of Cold Deformed Brass

Z. Avramovic, M. Antonijevic

16:45

Clay and Alumina Grain Size Effect on Highalumina Refractories

M. Jovanović, A. Beroš

19:00

POSTER SESSION *

20:00

CONFERENCE DINNER – Hotel "Šumadija"

P1

Experimental study and thermodynamic calculation of
Au-Bi-Sb system phase equilibria

D. Manasijević, D. Minić, D. Živković,
Ž. Živković

P2

Influence of the External Scale Cracking on the Ti3Al-Based Alloy Oxidation Kinetics

I. Cvijović, M. T. Jovanović

P3

Differential Scanning Calorimetry through the Example of AlCu15Mg5 Alloys

B. Zlaticanin, M. Filipovic, S. Markovic

P4

Analysis of Nonmetallic Inclusions Distribution and Microstructure in Centrifugally Cast Steel Pipes

B. Katavić, Z. Odanović

P5

Microstructural Analysis of Simulated Heat Affected Zone in Creep Resisting Steel

Lj. Milović, T. Vuherer, M. Zrilić, D. Momčilović, S. Putić

P6

A Model for Predicting Fracture Toughness in Overaged 7000 Alloy Forgings

M. Vratnica, Z. Cvijović, M. Rakin, I. Cvijović

P7

The influence of thermomechanical treatment and chemical composition on recrystallization of Al-Mg alloys

Lj.Radović, M.Nikačević, M.Popović, E.Romhanji

P8

Residual Stresses in Cold Rolled Narrow Strips: Experimental Measurement – FEM Simulation

N. Tadić, M. Mišović

P9

Influence of Thermomechanical Treatment on the Anneal Hardening Mechanism of a Sintered Cu-4at.%Ag Alloy

S. Nestorovic, I. Rangelov, D. Markovic

P10

Nondestructive Methods for Thermal Shock Characterization of Silicon Carbide / Cordierite Composite Material

M.Posarac, M.Dimitrijevic, J.Majstorovic, T.Volkov–Husovic, A.Devecerski, B.Matovic

P11

Characteristics of Copper and Copper – Al₂O₃ Composites Prepared by High – Energy Milling

V. Rajkovic, D. Bozic, M. T. Jovanovic

P12

Influence of silane coupling agents on the mechanical properties of recycled glass fiber-reinforced composites

V. Radojević, D. Stojanović, D. Trifunović, M. Perišić, R. Aleksić

P13

Hardness Response of Different Composite Systems with Fine-Grained Nickel Electrodeposited Films

J. Lamovec, V. Jović, D. Trifunović, R. Aleksić, V. Radojević

P14

Influence of Composition of Boroning Mixture on the Volume Change of Pressed and Boroned Samples From Iron Powder

S. Ivanov, E. Požega

P15

Deformation Regime and Microstructures of Gold Alloy 585

Z. Karastojković, R. Perić, Z. Janjušević, Z. Kovačević

P16

Effect of Electromagnetic Field on the Microstructure of Continual Casting Al 2024 Alloy Ingots

A. Patarić, Z. Gulišija, B. Jordović, B. Nedeljković

Session III Chairman: M. Popović

10:00

Plenary speaker: V. Radmilovic

Deformation behavior of metastable amorhous-nanocrystalline and crystallized intermetallic Al-Mo thin films

V. Radmilovic, J. Ye, Z. Lee, A. Minor, U. Dahmen, D.S. Gianola, K.J. Hemker, C. Ophus, E. Luber, D. Mitlin

11:00

Materials Technology for Advanced Land Based Gas Turbines

A. Neidel, B. Matijašević-Lux, J. Völker

11:15

Monitoring The Internal Oxidation In Rapidly Solidified Copper

R. Rudolf, I. Anžel, L. Kosec, D. Stojić

11:30

Structure, Phase Composition and Thermomagnetic Behavior of Nd14Fe79B7 Alloy

A. Grujić, J. Stajić-Trošić, V. Ćosović, N. Talijan, L. Teng

11:45

Development of a Collision Energy Absorber Of a Passenger Train

J. Tanasković, V. Lučanin, N. Radović

12:00

COFFEE BREAK

Session IV Chairman: N. Radović

12:30

Behaviour of Fe-Cr based alloys under neutron irradiation

M. Matijasevic, A. Almazouzi

12:45

Laser interactions with Ti,Ni and Al Alloys

M. Sreckovic, M. Kutin, R. Gospavic, M. Trtica

13:00

The Influence of the Plastic Deformation on the Metal Flow During High Frequency Electric Resistance Welding of Longitudinally Welded Pipes

R. Maksuti, H. Mehmeti, H. Oettel

13:15

Structure Changes Due to Service Deformation and Oscillations in Low Pressure Turbine Blades

Z. Karastojković, Z. Janjušević, Z. Kovačević

13:30

Phase equilibria investigation and characterization of the Au-In-Sb system

L. Gomidželović, D. Živković, N. Talijan, D. Manasijević, V. Ćosović, A. Grujić

13:45

Bending Properties of Glass-Polyester Composite Pipes

S. Putić, M. Stamenović, M. Zrilić, B. Bajčeta

14:00

CLOSING REMARKS