CONFERENCE PROGRAM |
WEDNESDAY, 25. May |
| 19.00 - 21.00 |
WELCOME RECEPTION AND REGISTRATION |
THURSDAY, 26. May |
| 08.00 - 09.00 |
REGISTRATION |
OPENING |
| 09.00 |
Prof. dr Aleksandar Sedmak, Deputy Minister, Ministry
of Science and Environment Protection, Republic of Serbia
|
| 09.10 |
Dr Zlatko Rakocevic, General Director, Institute of Nuclear
Sciences "Vinca" |
| 09.20 |
Prof. dr Borivoje Miškovic, President of Balkan Union
of Metallurgists |
| |
Representatives of General Sponsors
of the Conference: |
| 09.30 |
IMPOL SEVAL Aluminium Rolling Mill, Sevojno |
| 09.40 |
US Steel Serbia, Smederevo |
| 09.50 |
COFFEE BREAK |
Session A |
Chairman: Nenad Radovic |
| 10.05 |
PLENARY SPEAKER:
Bert VERLINDEN, Severe plastic
deformation of metals
Department of Materials Engineering, KU Leuven,
Belgium |
| 11.00 |
COFFEE BREAK |
| 11.15 |
Microstructure and Formability Development in Al Strip
Casting for Thin Gauge Foil Production
Varužan
Kevorkijan, A. Smolej, M. Doberšek, M. Lažeta,
E. Slacek, L. Kosec, B. Šarler, M. Torkar, R. Skrbinek,
A. Robic, A. Kolmanic, M. Pšenicnik, L. Kocevar, A.
Kegl, J. Pleterski |
| 11.30 |
High Temperature Deformation of Ti6Al4V at Low Strain
Rate
Mathieu Vanderhasten, Luc Rabet, Bert Verlinden |
| 11.45 |
Technology Update - “Forming Technology and Vehicle
Safety”
Ralf Kolleck, Stefan Pfanner, Heribert
Kassegger, Christoph Lind |
| 12.00 |
COFFEE BREAK |
| 12.15 |
Influence of Thermocyclic Treatment on the Anneal Hardening
Effect of CuAl10 Alloy
Svetlana Nestorovic, Desimir
Markovic, Ljubica Ivanic, Ivana Rangelov |
| 12.30 |
Lubricated and Dry Sliding of a Heat Treated Zn-based
Alloy
Milan T. Jovanovic, Ilija Bobic, Branko Djuric,
Nebojša Grahovac, Rato Ninkovic |
| 12.45 |
Deformation Behavior of the AlMg4.5Cu0.5 Type Alloy Sheet
Endre Romhanji, Miljana Popovic, Dragomir Glišic,
Radomir Dodok, Dragan Jovanovic |
| 13.00 |
LUNCH BREAK |
Session B |
Chairman: Endre Romhanji |
| 15.05 |
PLENARY SPEAKER:
Heinz PALKOWSKI, Austenitic
Sandwich Materials in the Focus of Research
Department of Metallurgy, TU Clausthal, Germany |
| 16.00 |
COFFEE BREAK |
| 16.15 |
Synthesis of ultra-hard, superabrasive AlMgB14 and AlMgB14
xTiB2 composites from
Al-Mg-B ternary system
Varužan Kevorkijan,
Sreco Davorin Škapin, M. Jelen, K. Krnel, M. Ambrožic,
K. Vidovic, T. Pustotnik |
| 16.30 |
Mechanical properties of short-fiber polymer matrix composites
Dušica Stojanovic, Dejan Trifunovic, Vesna
Radojevic, Radoslav Aleksic |
| 16.45 |
The Mechanical Properties and Corrosion Behavior of an
Al-Fe-Si (AA8079) Twin Roll Cast Foil
Kemal Delijic,
Dragan Radonjic |
| 17.00 |
COFFEE BREAK |
| 17.15 |
Contributions Regarding the Influence of Crystallization
System on Metals Deformability
Sorin Dimitriu,
Vasile Popescu |
| 17.30 |
Thixomolding of modern creep-resistant Mg-alloys with
particle and fiber reinforcements for lightweight applications,
O. Myronova, Vyacheslav Goryany, P.J. Mauk |
| 17.45 |
Dynamic recrystallization in M2 Tool Steel during Friction
Welding
Radovan Ciric, Nenad Radovic |
| 18.00 |
The Influence of Surface Roughness on the Selective Oxidation
and Surface Wettability of Dual Phase Steel
Ivana
Cvijovic, M. Spiegel, Ivana Parezanovic |
| 18.15 |
Corrosion Behavior of Cold Worked Copper Wire in Alkaline
Media with Presence of Chloride Ions
Svetlana Ivanov,
Mirjana Rajcic-Vujasinovic, Zoran Stevic |
| 18.30 |
Properties of the Cold Swaged and Strain Aged P/M 91W-6Ni-3Co
Heavy Alloy
Boris Katavic, Milutin Nikacevic |
| 20.00 |
CONFERENCE DINNER – Hotel M |
FRIDAY, 27. May |
Session C |
Chairman: Milan T. Jovanovic |
| 09.05 |
PLENARY SPEAKER:
Isabel GUTIERREZ, Modelling the mechanical behaviour
of steels with mixed microstructures
CEIT and Tecnun, University of Navarra, San
Sebastián, Spain |
| 10.00 |
COFFEE BREAK |
| 10.15 |
Mathematical Model of Structure Forming in Hot-rolled
Sheets
Toncho Koinov, Donka Angelova, Roman Shatalov |
| 10.30 |
FEM Modeling of Dynamic Recrystallization in 304 Stainless
Steel
Aleksandro Grabulov, H.Okuno, Nenad Radovic |
| 10.45 |
Temperature Distribution and Analysis of Steel Heating
Process in Walking Beam Furnace
Milisav Lalovic,
Žarko Radovic, Nada Jaukovic |
| 11.00 |
Damage Identification in Creep of Aluminium Alloy 2650-T8
Aleksandar Djakovic, B. F. Dyson, M. McLean |
| 11.15 |
Physics-Based Modelling of Creep Behaviour of Aluminium
Alloy 2650-T8
Aleksandar Djakovic, H. C. Basoalto,
B. F. Dyson, M. McLean |
| 11.30 |
COFFEE BREAK |
| 11.45 |
Modelling of Short Crack Growth in a Low-Carbon Steel
Subjected to Rotation -Bending Fatigue I. Crack Growth Data
Aleksander Davidkov, Donka Angelova |
| 12.00 |
Modelling of Short Crack Growth in a Low -Carbon Steel
Subjected to Rotation-Bending Fatigue II. Mathematical Description
Donka Angelova, Aleksander Davidkov |
| 12.15 |
Prediction of Thermal Stability Behavior of Refractory
Specimen: Deterioration Monitoring Using Image Analysis
Program
TatjanaVolkov-Husovic, Radmila Jancic-Heinemann,
Dragan Mitrakovic |
| 12.30 |
Influence of Solution Treatment on Cold Drawing of CuNi2Si
Rods
Dragana Markovic, Violeta Ilic |
| 12.45 |
The Effect of Copper Content and Production Conditions
on the Fraction of the ß Phase in CuZn36 Alloy
Snežana Jovanovic , Jugoslava Jankovic , Violeta
Ilic |
| 13.00 |
FEM Simulation of Residual Stresses in Cold Rolled Strips
Nebojša Tadic, Mitar Mišovic |
| 13.15 |
LUNCH BREAK |
Session D |
Chairman: Miroslav Plancak |
| 15.05 |
PLENARY SPEAKER:
Hendrik SCHULZE NIEHOFF,
Laser induced shock waves in deformation processing
Bremer Institut für angewandte Strahltechnik, Bremen,
Germany |
| 16.00 |
COFFEE BREAK |
| 16.15 |
Appearance of a Hard Layer (“a-case”) on the
Surface of Two Different Titanium-based Alloys
Biljana
Dimcic, Ilija Bobic, Slavica Zec, Milan T. Jovanovic
|
| 16.30 |
Activation Energy of Recovery Process in a Heat-Resistant
Alloy Type RR58 with Zirconium
Nada Jaukovic,
Žarko Radovic, Milisav Lalovic |
| 16.45 |
Investigations on the Microstructure and Fracture of Alloyed
Austempered Ductile Iron
Olivera Eric, Slavica
Zec, Dragan Rajnovic, Leposava Šidjanin , Milan T.
Jovanovic |
| 17.00 |
Microstructural Characterization of Modified Commercial
2219 Aluminum Alloy
Vesna Maksimovic, Zorica Cvijovic,
Velimir Radmilovic |
| 17.15 |
Effect of cold rolling reduction on critical strains and
final grain size of Al-Mg alloys containing Mn
Ljubica
Radovic, Milutin Nikacevic |
SOCIAL PROGRAMME:
Sightseeing tour
Dinner |
SATURDAY, 28. May |
Session E |
Chairman: Radoslav Aleksic |
| 10.00 |
Comparison of Theoretical Calculations of Phase Equilibria
in the In-Sb-Sn System with Experimental Data
Dragan
Manasijevic, Duško Minic, Dragana Živkovic, Mira
Cocic, Radiša Todorovic |
| 10.15 |
Fracture toughness of Silicon nitride
Branko
Matovic, Snežana Boškovic |
| 10.30 |
Influence of Metallic Oxides on Oxidative Stability and
Electrical Properties of Fullerene C60
Aleksandar
Devecerski |
| 10.45 |
Phase-Transformation in Colloidal and Alkoxy-Derived Cordierite
Gels
Rada Petrovic, Dj.Janackovic, I.Jankovic-Castvan,
S.Zec, Lj.Kostic-Gvozdenovic |
| 11.00 |
COFFEE BREAK |
| 11.15 |
XRD Analysis of Boron Doped Glassy Carbon
Aleksandar
Devecerski, Branko Matovic |
| 11.30 |
Phase Composition and Magnetic Properties of Melt Spun
Nd-Fe-B Alloy
Jasna Stajic-Trošic, Aleksandar
Grujic, Vladan Cosovic, Nadežda Talijan, T. Zak |
| 11.45 |
Phase Transformations and Structure of Rapid Quenched
Nd-Fe-B alloy during the Thermal Treatment
Vladan
Cosovic, Nadežda Talijan, Vojislav Spasojevic, Jasna
Stajic-Trošic, Aleksandar Grujic, Vladimir Menushenkov |
| 12.00 |
Some Aspects of Design and Properties of Sensing Elements
Based on the Optical Fiber – Polymer – Magnetic
Powder
Dragutin Nedeljkovic, Vesna Radojevic, Nadežda
Talijan, Radoslav Aleksic |
| 12.15 |
Differential Scanning Calorimetry through the Example
of AlCu15Mg2 and AlCu15Mg4 Alloys
Biljana Zlaticanin,
Branislav Radonjic, Mirjana Filipovic, Andreja Valcic, Radoslav
Aleksic, Slobodanka Nikolic |
| 12.30 |
CONFERENCE CLOSE |
