Plenary Lectures |
Severe
Plastic Deformation of Metals
Bert VERLINDEN
Department of MTM, Katholieke Universiteit Leuven, Belgium
|
Austenitic
Sandwich Materials in the Focus of Research
Heinz PALKOWSKI, Günther LANGE
Department of Metallurgy, TU Clausthal, Germany
|
Modelling
the Mechanical Behaviour of Steels with Mixed Microstructures
Isabel GUTIERREZ
CEIT and Tecnun, University of Navarra, San Sebastián, Spain
|
Laser
Induced Shock Waves in Deformation Processing
Hendrik SCHULZE NIEHOFF
Bremer Institut für angewandte Strahltechnik, Bremen, Germany
|
Contributed Papers |
Microstructure
and Formability Development in Al Strip Casting for Thin Gauge Foil
Production
Varužan Kevorkijan, A. Smolej, M. Doberšek, M. Lažeta, E. Slacek,
L. Kosec, B. Šarler, M. Torkar,
R. Skrbinek, A. Robic, A. Kolmanic, M. Pšenicnik, L. Kocevar, A.
Kegl, J. Pleterski
|
High Temperature
Deformation of Ti6Al4V at Low Strain Rate
Mathieu Vanderhasten, Luc Rabet, Bert Verlinden
|
Technology
Update - "Forming Technology and Vehicle Safety"
Ralf Kolleck, Stefan Pfanner, Heribert Kassegger, Christoph Lind
|
Influence
of Thermocyclic Treatment on the Anneal Hardening Effect of CuAl10
Alloy
Svetlana Nestorović, Desimir Marković, Ljubica Ivanić, Ivana Rangelov
|
Lubricated
and Dry Sliding of a Heat Treated Zn-based Alloy
Milan T. Jovanovic, Ilija Bobic, Branko Djuric, Nebojša Grahovac,
Rato Ninkovic
|
Deformation
Behavior of the AlMg4.5Cu0.5 Type Alloy Sheet
Endre Romhanji, Miljana Popović, Dragomir Glišić, Radomir Dodok,
Dragan Jovanović
|
Synthesis
of ultra-hard, superabrasive AlMgB14 and AlMgB14-xTiB2 composites
from Al-Mg-B ternary system
Varužan Kevorkijan, Sreco Davorin Škapin, M. Jelen, K. Krnel, M.
Ambrožic, K.Vidovic, T. Pustotnik
|
Mechanical
properties of short-fiber polymer matrix composites
Dušica Stojanovic, Dejan Trifunovic, Vesna Radojevic, Radoslav Aleksic
|
The
Mechanical Properties and Corrosion Behavior of an Al-Fe-Si (AA8079)
Twin Roll Cast Foil
Kemal Delijic, Dragan Radonjic
|
Contributions
Regarding the Influence of Crystallization System on Metals Deformability
Sorin Dimitriu, Vasile Popescu
|
Thixomolding
of modern creep-resistant Mg-alloys with particle and fiber reinforcements
for lightweight applications
O. Myronova, Vyacheslav Goryany, P.J. Mauk
|
The
Influence of Surface Roughness on the Selective Oxidation and Surface
Wettability of Dual Phase Steel
Ivana Cvijovic, M. Spiegel, Ivana Parezanovic
|
Corrosion
Behavior of Cold Worked Copper Wire in Alkaline Media with Presence
of Chloride Ions
Svetlana Ivanov, Mirjana Rajcic-Vujasinovic, Zoran Stevic
|
Properties
of the Cold Swaged and Strain Aged P/M 91W-6Ni-3Co Heavy Alloy
Boris Katavic, Milutin Nikacevic
|
Mathematical
Model of Structure Forming in Hot-rolled Sheets
Toncho Koinov, Donka Angelova, Roman Shatalov
|
FEM
Modeling of Dynamic Recrystallization in 304 Stainless Steel
Aleksandro Grabulov, H.Okuno, Nenad Radovic
|
Temperature
Distribution and Analysis of Steel Heating Process in Walking Beam
Furnace
Milisav Lalovic, Žarko Radovic, Nada Jaukovic
|
Damage
Identification in Creep of Aluminium Alloy 2650-T8
Aleksandar Djakovic, B. F. Dyson, M. McLean
|
Physics-Based
Modelling of Creep Behaviour of Aluminium Alloy 2650-T8
Aleksandar Djakovic, H. C. Basoalto, B. F. Dyson, M. McLean
|
Modelling
of Short Crack Growth in a Low-Carbon Steel Subjected to Rotation
-Bending Fatigue
I. Crack Growth Data
Aleksander Davidkov, Donka Angelova
|
Modelling
of Short Crack Growth in a Low -Carbon Steel Subjected to Rotation-Bending
Fatigue
II. Mathematical Description
Donka Angelova, Aleksander Davidkov
|
Prediction
of Thermal Stability Behavior of Refractory Specimen: Deterioration
Monitoring Using Image Analysis Program
TatjanaVolkov-Husovic, Radmila Jancic-Heinemann, Dragan Mitrakovic
|
Influence
of Solution Treatment on Cold Drawing of CuNi2Si Rods
Dragana Markovic, Violeta Ilic
|
The
Effect of Copper Content and Production Conditions on the Fraction
of the beta-Phase in CuZn36 Alloy
Snežana Jovanovic , Jugoslava Jankovic , Violeta Ilic
|
FEM
Simulation of Residual Stresses in Cold Rolled Strips
Nebojša Tadic, Mitar Mišovic
|
Appearance
of a Hard Layer ("alpha-case") on the Surface of Two Different
Titanium-based Alloys
Biljana Dimcic, Ilija Bobic, Slavica Zec, Milan T. Jovanovic
|
Activation
Energy of Recovery Process in a Heat-Resistant Alloy Type RR58 with
Zirconium
Nada Jaukovic, Žarko Radovic, Milisav Lalovic
|
Investigations
on the Microstructure and Fracture of Alloyed Austempered Ductile
Iron
Olivera Eric, Slavica Zec, Dragan Rajnovic, Leposava Šidjanin, Milan
T. Jovanovic
|
Microstructural
Characterization of Modified Commercial 2219 Aluminum Alloy
Vesna Maksimovic, Zorica Cvijovic, Velimir Radmilovic
|
Effect
of cold rolling reduction on critical strains and final grain size
of Al-Mg alloys containing Mn
Ljubica Radovic, Milutin Nikacevic
|
Comparison
of Theoretical Calculations of Phase Equilibria in the In-Sb-Sn
System with Experimental Data
Dragan Manasijevic, Duško Minic, Dragana Živkovic, Mira Cocic, Radiša
Todorovic
|
Fracture
toughness of Silicon nitride
Branko Matovic, Snežana Boškovic
|
Influence
of Metallic Oxides on Oxidative Stability and Electrical Properties
of Fullerene C60
Aleksandar Devecerski
|
Phase-Transformation
in Colloidal and Alkoxy-Derived Cordierite Gels
Rada Petrovic, Djordje Janackovic, Ivona Jankovic-Castvan, Slavica
Zec, Ljiljana Kostic-Gvozdenovic
|
XRD
Analysis of Boron Doped Glassy Carbon
Aleksandar Devecerski, Branko Matovic
|
Phase
Composition and Magnetic Properties of Melt Spun Nd-Fe-B Alloy
Jasna Stajic-Trošic, Aleksandar Grujic, Vladan Cosovic, Nadežda
Talijan, T. Zak
|
Phase
Transformations and Structure of Rapid Quenched Nd-Fe-B alloy during
the Thermal Treatment
Vladan Cosovic, Nadežda Talijan, Vojislav Spasojevic, Jasna Stajic-Trošic,
Aleksandar Grujic, Vladimir Menushenkov
|
Some
Aspects of Design and Properties of Sensing Elements Based on the
Optical Fiber - Polymer - Magnetic Powder
Dragutin Nedeljkovic, Vesna Radojevic, Nadežda Talijan, Radoslav
Aleksic
|
Differential
Scanning Calorimetry through the Example of AlCu15Mg2 and AlCu15Mg4
Alloys
Biljana Zlaticanin, Branislav Radonjic, Mirjana Filipovic, Andreja
Valcic, Radoslav Aleksic,
Slobodanka Nikolic
|
Dynamic
recrystallization in M2 Tool Steel during Friction Welding
Radovan Ciric, Nenad Radovic
|